How to reduce the size
of an image (1)

Page created on 11/01/2026.

How to reduce the size of an image? This question often comes up on the Loco-Revue forum, where image sizes are limited to 500 KB, which is still quite large in my opinion. It also arises for those who have a website and want to limit file sizes, both to speed up page loading and to avoid exceeding a disk space limit set by their internet service provider, at the risk of paying extra. Not to mention SEO (Search Engine Optimisation), or optimising page rankings, particularly by Google.

For the rest of this article, I will use the forum’s famous 500 KB limit as a benchmark. The reasoning would be the same for any other limit. A photo taken by a mid-range digital camera with a resolution of 24 megapixels generally “weighs” between 10 and 15 MB in JPEG format, depending on the complexity of the subject. The challenge is to reduce this size by a factor of 20 or 30 without significantly altering the visual quality of the image! Not an easy task, then.

Two ways to reduce image size

There are two main ways to reduce image size, both of which can of course be combined:

There are other ways to achieve the same result. For example, you can use a different file format, such as WebP, which usually produces smaller images than JPEG with better quality. However, this format is not yet accepted everywhere: for example, it is not accepted on the Loco-Revue forum, which only accepts JPEG and PNG. By the way, what about the latter? It is a non-destructive format, capable of preserving all the pixels of the original image. But this quality comes at the cost of a larger file size — in general, but not always. This format is particularly suitable for “line art” images generated by drawing software, or images with large areas of solid colours.

My method for comparing results

Starting with the original image, usually in JPEG format, I reduce its size to below the critical 500 KB mark using two free software programmes: Paint.net for the actual reduction, and XnView for display and comparison.

Reduction by compression

This is very simple: when saving, the software asks you to specify the quality as a percentage, with 100 % as the default. The resulting size is displayed. All you have to do is gradually decrease the percentage until you get the size you want.

Sometimes it is impossible to achieve the required size, in which case you will need to combine the two types of reduction. I go down to 30 %, or even lower. That seems like a lot, doesn’t it? But wait until you read on.

Reduction by decreasing dimensions

In this case, Paint.net does not allow you to know the file size in advance. I therefore proceed by successive trials. The image is always saved at 100 % JPEG quality. In general, the dimensions must be divided by at least 4 to get below 500 KB. For clarity, the image obtained by this process will henceforth be referred to as the shrunk image.

Comparison of results

An initial comparison will be made between the original image and the compressed one to estimate the destructive effect of the latter.

When comparing the compressed image and the shrunk image, the question arises of comparing two images, one of which has significantly smaller dimensions than the other.

I consider the conditions of an Internet publication. To do this, I have created an HTML file in which I display the two images to be compared, with a fixed width of 1,024 px. Obviously, the result will be less good than for the originals, but will undoubtedly be closer to the everyday use of images. The browser, in this case Google Chrome, handles the scaling of the images.

I take a screenshot of each image, then save both copies in JPEG format at 100 % quality.

All that remains is to observe the result…

Notation conventions

File names are assigned suffixes: -cnn for nn % compression; -rnn for nn % reduction. For example, a file whose original name is my-photo.jpg will become:

Screenshot images obtained from the browser will have the same name, with an additional suffix: -1024px.

One last point: no one is obliged to take my word for it. I therefore keep the original files available on request so that the following steps can be repeated.

Let’s move on to the practical side.