X 3217 railcar Electrotren

Page created on 04/02/2010; updated on 03/07/2026.

Brand - Reference

Electrotren 2138

Type

XBDP 3217 type Renault ABJ 3

Mass / max. current under 12 V

274 g; 239 g after installation of lighting resulting in a change in ballast / 0,7 A

Comments

The overall impression is flattering, except perhaps for the thickness of the cab window posts. The overall scale is scrupulously respected. The railcar yellow is too dark, tending towards beige. The bogie sides block the pivoting and can therefore only be used statically. No coupling.

I first bought the red-roofed model X 3506 from the Ouest (Sotteville depot if I remember well) in a hurry. When I found the cream-roofed Nord model, I transferred the modifications made to the former to the latter. The former, almost intact in its original box, has since been resold.

The radiator fairing sheet (the cap) should be flush with the roof at the rear, as can be seen in the photo oppositeabove. See this quote from the LR forum (page 4).

The Nord versions had the radiator fairing plate joined to the upper rounding of the body, (Ferrovissimo p. 12, 44) whereas on the other series this plate was a little higher (Ferrovissimo p. 4, 5, 33, 35).

The windscreen wipers should have their pivot point in the middle of the right-hand bay post.

See the Loco-Revue Forum.

Modifications

  • Ex-3506: Lenz Silver+ decoder.

  • Ex-3506: new PCB (compartment lighting and separate control of the red lights).
  • Ex-3506: SMD elongating drawbars and Roco couplings.
  • Body swapped with X 3506; hooks, air hoses reinstalled after being shortened; black paint in air intake grilles; SMD wipers fitted.
  • The bogie sidewalls have been thinned to render them functional on a 500 mm curve radius. Profi couplings.
  • Electrical circuits remade: front / rear connection by copper adhesive tapes. There is no longer a connector at the rear. Repair of the connections to the rear bogie (the wires are very brittle).
  • Horizontal windscreen wipers and anti-skid on buffer beams, in personal photo-cutting, installed. Photo of modificationsModifications on the X-3217 Electrotren

History

The ABJ 3, a 300 hp railcar, was built from 1935 by Renault.

The X 3211 to 3221 ex-Nord 711 to 721, delivered in 1937 to La Chapelle, were typically based in Douai from 1954 and then in Longueau from 1969. They were written off between 1970 and 1975. They seem to have kept their cream-coloured roof until the end.

X 3217 was delivered in December 1937. Successive depots: Lille-Rouges-Barres (11/1947); Fives (9/1953); Douai (9/1954); Longueau (10/1969). It was written off in January 1973.

Documents

  • Loco-Revue sheet No. 187 (older series No. 16). Sheet preview.LR sheet
  • Assignments at eurocity64.
  • Photos on RailFanEurope.
  • Matériel Ferroviaire Renault folder (see description here).
  • Ferrovissimo No. 7 of February 2006 : Le métro des provinces françaises.
  • Le Train special No. 35 of March 2003, les ABJ. In particular, on p. 35, there is a photo of the X 3217 at Aulnoye, on 28 April 1971 (photo above).
  • Video on Dailymotion: Autorail Renault. Manufacture of an ABJ railcar. And as always in those days (fifties), with a cigarette in the mouth and no protective equipment!
  • Electrotren instruction leaflet.

X 3217 ElectrotrenX 3217 Electrotren

Autorail X 3217 ABJ Nord

Photo Cl. Lapierre in Le Train spécial No. 35.

Dimension Actual 1:87 Model
Overall length ¹ 26 254 301.8 301.0
Chassis length ¹ 25 180 289.4 287.0
Width 2 886 33.2 33.1
Height (rear) 3 261 37.5 37.0
Pivot distance 16 930 194.6 194.5
Bogie wheelbase 2 500 28.7 28.6
Wheel diameter 860 9.9 9.9
  1. Le Train No. 35, p. 27

Document available as a PDF.
If you are interested, please let me know by e-mail,
specifying the title of the document-s.
For conditions, see page Loco-Revue documentary sheets. .

Document available as a PDF.
If you are interested, please let me know by e-mail,
specifying the title of the document-s.
For conditions, see page Books and magazines. .