Page created on 10/10/2026.
Brekina 83302
Magirus-Deutz Jupiter quarry tipper.
The second-generation Magirus-Deutz Jupiter with its angular bonnet was manufactured from 1960 to 1967.
Note: The model designation changed in 1964 to alphanumeric codes such as 230 D 22 AK, for example. This is the designation of the lorry shown in the photograph. Explanation: 230 = power in DIN horsepower; D = Deutz engine; 22 = gross vehicle weight in tonnes; A = all-wheel drive; K = tipper body (Kipper).
Specifications vary depending on the model. Here are the main ones. Air-cooled V8 diesel engine, 10,644 cm³, 169 kW (230 hp) DIN. Tyres: 14.00-20.
Documents:
| Dimension | Actual | 1:87 | Model |
|---|---|---|---|
| Overall length | 7 170 to 8 350 |
82.4 to 96.0 |
89.8 |
| Chassis length | 6 955 to 8 955 |
79.9 to 102.9 |
79.9 |
| Cab width | 2 470 | 28.4 | 27.8 |
| Cab height | 2 560 | 29.4 | 29.1 |
| Total wheelbase | 5 050 | 58.0 | 57.0 |
| Rear axles’ wheelbase | 1 300 | 14.9 | 14.8 |
| Front track | 1 955 | 22.5 | 24.1 |
| Rear track | 1 715 | 19.7 | 22.3 |
| Wheel diameter | 1 150 | 13.2 | 12.8 |
| Tyre width | 356 | 4.1 | 3.5 |
The engraving has a rather soft appearance, perhaps due to the paint being too thick, and in any case too glossy. The markings on the nose and sides of the bonnet are clear. The windscreen panes are flush with the surface but wavy. The windscreen wipers are moulded into the panes.
The dimensions are accurately reproduced.
Clearly, the short chassis has been chosen (see dimensions table). That’s to be expected for a tipper. It is well detailed: the three drive axle differentials are shown. The silver exhaust pipe is a bit too visible, but it is easy to weather. The cab steps are a bit crooked.
The tipper body is not functional; it is glued in place. A pity if you wanted to recreate a worksite scene.
The model-specific mirrors are supplied for the user to fit. This is easy, as the mounting holes are wide – too wide, in fact: combined with the very short mounting pin, these parts won’t stay in place, even when glued. Furthermore, the thermoformed insert in the box has no space for them. The brackets could be thinner, perhaps photo-etched…