Page created on 09/10/2026.
Brekina 29628
Lancia Fulvia Coupé 2 1970.
Overall, a successful model (the photograph does not do justice to the metallic paintwork, which contains very fine particles). It does, however, have two flaws: the sloping front bumper¹, and the indentation in the bodywork on either side of the headlights, which does exist in reality but is much less noticeable and virtually invisible on the 1:87 scale model.
Flat-top windscreen and rear window; almost flat-top side windows. Windscreen wipers moulded into the bodywork. Fitted front lights, painted rear lights.
One-piece interior, including the steering wheel.
The car is dismantled by pulling on the axles one by one
to release the fixing pins. Photo.
1 - This is due to the thermoformed plastic retaining wedge inside the box.
Documents:
| Dimension | Actual | 1:87 | Model |
|---|---|---|---|
| Length | 3 975 | 45.7 | 45.8 |
| Width | 1 555 | 17.9 | 18.4 |
| Height | 1 300 | 14.9 | 15.0 |
| Wheelbase | 2 330 | 26.8 | 26.0 |
| Front track | 1 300 | 14.9 | 15.3 |
| Rear track | 1 260 | 14.5 | 14.8 |
| Wheel diameter | 620 | 7.1 | 7.2 |
| Tyre width | 165 | 1.9 | 2.0 |
The Lancia Fulvia 2 was manufactured from 1970 to 1973, following the takeover of the brand by FIAT.
Specifications (1970 1300 S model): 15° V-4 engine, 1298 cm³, 66 kW (90 ch) DIN. Tyres: 165×14. Top speed: approximately 175 km/h.